WTS 1996 Strut/Shocks and HR Springs

dnylrq · 01-31-2012, 01:01 PM

Well folks, it's been a long run, but my Rav has official broken to a point which no longer warrants spending the money to fix it.

Everything is still new and in the boxes I purchased them in.

I have:
****Just found (I forgot about it) the K-mac front alignment kit for the RAV4. Definitely needed if you plan to lower your RAV4. Available only from Australia*****
Still brand new and I'll let it go for $75.00 That's almost 50% off, and you don't have to wait a month to get it!

Front and Rear Bilstein Sport struts/shocks
**Springs are sold! **

I also have for sale:
Torque Master Spark plugs (never tested, but seem to be best I could find)
Magnecor 8mm Pure silicone race wires w/ custom length ignition coil wire (+3 in over stock)

*Shipping charges will be your responsibility. I will add it on to the price of what I sell the parts to you for.*

For the Shocks / Stuts
$300 for the set. I paid $420.

For the Magnecor Race Wires and Torque master plugs
$ 160 I paid $264

Batman722 · 02-01-2012, 12:02 AM

I can do $150 shipped for the springs, I can paypal asap.

dnylrq · 02-01-2012, 11:00 AM

I'll find out what the cost of shipping is today, and get back with you.

Here's the pic of the springs.

AW111 · 02-01-2012, 06:05 PM

If possible (crosses fingers), could you please measure the length of the rear springs?
I've been trying to build a custom setup and I really need this measurement.

dnylrq · 02-01-2012, 07:02 PM

Without looking, I believe the rear ones, which are the larger spring, are measuring 12 in. and the smaller (diameter) spring, which I believe is the front is 10 in.

edit: I stand corrected, the smaller diameter spring goes in the rear

AW111 · 02-02-2012, 02:12 PM

Big Thanks dnylrq!! :D

dnylrq · 02-05-2012, 04:26 PM

Still have items for sale!

AW111 · 02-07-2012, 12:00 PM

Do you have photos of the K-mac front alignment kit?

dnylrq · 02-07-2012, 10:30 PM

I will post some up in the morning for you. If you're going for any type of good setup, they are the only ones worth going with. The other sets available have a lower quality bolt that they use in the setup (both grade and size). Just my opinion, but I was going for the gold with my setup

edit: Sorry I didn't get to it this morning, I had a job interview that came up.. I will definitely get to it tomorrow morning!

dnylrq · 02-09-2012, 04:40 PM

Here's a pic of the kit. Instructions from the manufacturer are included. The single piece by itself at the bottom is used to enlarge the hole in the knuckle where it goes.

01-31-2012, 01:01 PM	#1 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	WTS 1996 Strut/Shocks and HR Springs Well folks, it's been a long run, but my Rav has official broken to a point which no longer warrants spending the money to fix it. Everything is still new and in the boxes I purchased them in. I have: **Just found (I forgot about it) the K-mac front alignment kit for the RAV4. Definitely needed if you plan to lower your RAV4. Available only from Australia* Still brand new and I'll let it go for $75.00 That's almost 50% off, and you don't have to wait a month to get it! Front and Rear Bilstein Sport struts/shocks Springs are sold! ** I also have for sale: Torque Master Spark plugs (never tested, but seem to be best I could find) Magnecor 8mm Pure silicone race wires w/ custom length ignition coil wire (+3 in over stock) Shipping charges will be your responsibility. I will add it on to the price of what I sell the parts to you for. For the Shocks / Stuts $300 for the set. I paid $420. For the Magnecor Race Wires and Torque master plugs $ 160 I paid $264 Last edited by dnylrq; 02-05-2012 at 04:25 PM. Reason: updated items

02-01-2012, 12:02 AM	#2 (permalink)
Batman722 Member Join Date: Aug 2010 Location: Rhode Island Posts: 130 Thanks: 1 Thanked 0 Times in 0 Posts Feedback Score: 1 reviews	I can do $150 shipped for the springs, I can paypal asap. __________________ 1995 Celica - ST205 3sgte swapped 1994 Celica - Redtop Beams swapped 1998 Rav4 - winter beater - Redtop Beams swapped and actually fun to drive now.

02-01-2012, 07:02 PM	#5 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	Without looking, I believe the rear ones, which are the larger spring, are measuring 12 in. and the smaller (diameter) spring, which I believe is the front is 10 in. edit: I stand corrected, the smaller diameter spring goes in the rear Last edited by dnylrq; 02-02-2012 at 09:41 AM.

02-07-2012, 10:30 PM	#9 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	I will post some up in the morning for you. If you're going for any type of good setup, they are the only ones worth going with. The other sets available have a lower quality bolt that they use in the setup (both grade and size). Just my opinion, but I was going for the gold with my setup edit: Sorry I didn't get to it this morning, I had a job interview that came up.. I will definitely get to it tomorrow morning! Last edited by dnylrq; 02-08-2012 at 06:50 PM.

02-01-2012, 11:00 AM	#3 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	I'll find out what the cost of shipping is today, and get back with you. Here's the pic of the springs.

02-01-2012, 06:05 PM	#4 (permalink)
AW111 Member Country: Join Date: Aug 2011 Location: Brooklyn, New York Posts: 170 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	If possible (crosses fingers), could you please measure the length of the rear springs? I've been trying to build a custom setup and I really need this measurement.

02-02-2012, 02:12 PM	#6 (permalink)
AW111 Member Country: Join Date: Aug 2011 Location: Brooklyn, New York Posts: 170 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	Big Thanks dnylrq!! :D

02-05-2012, 04:26 PM	#7 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	Still have items for sale!

02-07-2012, 12:00 PM	#8 (permalink)
AW111 Member Country: Join Date: Aug 2011 Location: Brooklyn, New York Posts: 170 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	Do you have photos of the K-mac front alignment kit?

02-09-2012, 04:40 PM	#10 (permalink)
dnylrq Senior Member Join Date: Dec 2004 Location: Jackson, MI Posts: 427 Thanks: 0 Thanked 0 Times in 0 Posts Feedback Score: 0 reviews	Here's a pic of the kit. Instructions from the manufacturer are included. The single piece by itself at the bottom is used to enlarge the hole in the knuckle where it goes.

Remove Advertisements Sponsored Links
RAV4World.com Advertisement