Cruise control installation

[JuneBug]

Originally Posted by rns

But what are those symbols mean between spiral cable and AE3? Or-symbols?
They are in pairs, is there a problem if those are missing, what ever they are?

They are multi-pin connectors. And they should already be there.

[dtalk]

What about installing an after-market CC? I did this with two of my cars, not the Rav. I would think it would work for the Rav just as well, and might cost less.

[anchorman]

Its far easier than getting involved with the spiral cable. This the is part which is on your soil!;

TOYOTA CAMRY YARIS COROLLA 07 08 09 10 CRUISE CONTROL | eBay?

.....and this is a similar guide specifically for the RAV;

4.3 Toyota Cruise Control Retro-Fit - Rav 4 Club - Toyota Owners Club - Toyota Forum

BTW, you can get access to all our guides here;

Technical Information/hints & Tips - Rav 4 Club - Toyota Owners Club - Toyota Forum

[vanib]

Of course, it's more straight forward if all the wiring from the clockspring exists. Then it would just be plug and play. let's hope all the RAVs out there have the needed wiring and components.

We've been surprised before by Toyota having different wiring depending on the year, trim and location of build.

[redrogodbz]

I have absolutly nothing for the cruise control coming out of the clockspring so I am pretty sure mine won't be plug and play

[vanib]

But if it is just wires needing to be connected, shouldn't be too difficult.
I hope you have all other parts pre-installed.

[redrogodbz]

But if it is just wires needing to be connected, shouldn't be too difficult.
I hope you have all other parts pre-installed.

If thats the case, do you have any idea where would I have to connect this wires?

[vanib]

look at post#10.
I could take a look at my car when I have the chance

[rns]

Originally Posted by dtalk

What about installing an after-market CC? .

I prefer the usability of oem switcth in the steering wheel with no batteries etc. to make wireless connection. I don't know how aftermarket ones could offer wires into the steering wheel.

I hope to manage with these...
Clutch switch 88280-14030 for M/T 20euros 26USD +postage
teilexpress - TOYOTA Originalteile - TOYOTA-Zubehoer 88280-14030 Schalter 88280-14030
Spiral cable 84306-48030 63euros 80USD +postage
NEW TOYOTA LEXUS 84306-48030 SPIRAL CABLE SUB-ASSY CLOCK SPRING AIRBAG | eBay
Cruise switch 84632‑34011 and wire 84633‑48020 21euros 27USD +postage
TOYOTA CAMRY YARIS COROLLA 07 08 09 10 CRUISE CONTROL | eBay

So plan is to find connector AE3 pull two wires to steering column into spiral cable connectors; replace the spiral cable unit, change the horn wire connector and install the cruise switch.

[vanib]

[QUOTE=rns;942804]
I hope to manage with these...
Spiral cable 84306-48030 63euros 80USD +postage
NEW TOYOTA LEXUS 84306-48030 SPIRAL CABLE SUB-ASSY CLOCK SPRING AIRBAG | eBay

QUOTE]

This item does not come with the angle sensor. You would have to transfer your current one to the new one.