Originally Posted by ken_rav4
That looks AWESOME. I want the same or similar setup on my 2015 Limited AWD (18” wheels). But I have no clue what the hell I’m doing ... I just had new tires installed, so I don’t want to lose the new rubber (P235/55R18), or have to do anything dramatically different from the stock.
What wheels will match what I’ve got?
Did you mean you want to have the general look of rexbl's Method wheels?
Or you just want anything that would be close to OEM fit?
if i remember right, the Limited wheels are 18" x 7.5" wide x 45mm offset.
Furthermore, most OEM wheels are at least "low pressure cast" in construction.
Looking at tire rack, the only one there that matches all of those specs will be the MSW Type 28.
oops, i almost forgot another "spec"
the "center bore" is 60.1 mm to match the "hub" on the wheel mount.
Note most aftermarket will be bigger than the oem center bore, so you'll have to use a centering ring (or you can also opt not to, so long as you check they've been properly centered.
i have purchased an aftermarket wheel for one of my 4.4's but after finding out that a discont tire tech has carelessly just jammed the wheel into the hub (unclipping the clip for the centering ring)...i changed my mind and used oem wheel instead. i have an le. which are on steels.