Toyota RAV4 Forums banner

2022 Hybrid LTD Bezel for SS3 fog lights

399 Views 12 Replies 6 Participants Last post by  dummyvariable
2
Good day to y'all,

First-time posting here. Have a 2022 Rav4 Hybrid Limited and learned to see that the LED fog light is housed in a bezel that is not conducive to the SS3 replacement in the image below. The question is - where can a guy get that bezel for housing the upgraded SS3? I tried searching the forum already and can't find any direct links to this so far... any input is greatly appreciated.


this looks similar to OEM



this is what I am after!
22
See less See more
1 - 7 of 13 Posts
The ss3 came with the mounting brackets, the lights themselves are bigger than the existing ones. I'll contact the dealership and gem oem bezel parts.
Are you sure it won't fit the housing you showed? My SE didn't come with fog lights, but I used some generic kit off Amazon for the bezel/housing and wiring, then added the Diode Dynamics SS3 right in, and it looked like the bezel in the first picture.

I'm not an expert with Rav4s, but that second picture looks to be a different model year, like a 4th generation.
Yea i just grabbed photos from google for this - its the Bezel itself, realizing that the LTD model uses a different light for the fog light systems.
Are you sure it won't fit the housing you showed? My SE didn't come with fog lights, but I used some generic kit off Amazon for the bezel/housing and wiring, then added the Diode Dynamics SS3 right in, and it looked like the bezel in the first picture.

I'm not an expert with Rav4s, but that second picture looks to be a different model year, like a 4th generation.
Do you have a link to this generic kit?
If you have a 2022 Hybrid model, then the housing should be the same and I can't find one on OEM parts sites currently. Thanks in advance!
It sounds like you've got the newer style fog lamps, which have a little square-ish bezel around them and are smaller in diameter than the older style. These newer style look like so:

View attachment 196125

If so, you will want the older-style fog lamp trim, which is what's in your top image above. Assuming you have the correct brackets with your SS3s, they will fit in the older-style bezels just fine, though a small amount of the lens around the perimeter is covered up:

View attachment 196126

When I installed my SS3s, I got the bezels off eBay and was able to find them on there pretty cheap.
Thanks for this input as well - I did just grab two images from the internet to get the point across! lol

This is my goal - do you have the links for this on Ebay/Amazon?
I found this link - suitable?
1 - 7 of 13 Posts
Top