B
babyboycs
·Guest
Joined
·
0 Posts
does anyone know where i could find some rims to match my tire size??
215/70R16
1 - 2 of 2 Posts
Joined
·
1,484 Posts
Tire Rack... they should be able to help you out, and they have many rims to choose from.
Sometimes eBay sells some cheap factory and aftermarket rims, it appears that you need to be getting some 16" rims. Just make sure the offset of the rim is similar to OEM.
Sometimes eBay sells some cheap factory and aftermarket rims, it appears that you need to be getting some 16" rims. Just make sure the offset of the rim is similar to OEM.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Another Rav4 3SGTE Swap
4.1 D.I.Y. and ModificationsHi, I've owned my MR2 for 19 years and through endless mods and three motor swaps I became pretty mechanically inclined and used to the 3SGTE. Recently, a 1997 Rav4 with a blown motor fell into my lap for $300 and I couldn't resist the project. My goal is to turn it into a fun and reliable...- 33
- 4K
-
"Rally Raid" RAV4.1 1995
4.1 D.I.Y. and ModificationsHello all RAV4.1 enthusiasts. We've finally finished our project of few years and wanted to share it with you all. Intro Autosuunnistus (loosely translates to auto orienteering) is a form motorsport ran in Nordic countries, started in1950's. It's a crossbreed of normal orienteering and...- 15
- 1K
-
rhinoe · updated
-
Locking Diff 1st Gen
4.1 D.I.Y. and ModificationsHello all, Been off of here for a few years after wrecking my last RAV. Just picked up another and now have a question. My last was an awd auto with the locking diff. My ‘new’ one is also an auto awd but without the lock switch. I have a chance to pick up locking doodads from a...- 8
- 1K
-
Vacuum Line replacement with high temp silicone lines
4.1 D.I.Y. and ModificationsMy vacuum lines were old, hard, cracked, and brittle (18 years in a hot engine compartment will do that to you) so it was time to replace them. Doing it while the engine was out just made it that much easier, this was part of my replacing the manual transmission project. If you still have the...- 49
- 8K
-
eodgator · updated
-
IG1 AND IG2 CONNECTOR FOR ENGINE LOOM TO CLUSTER
4.1 D.I.Y. and ModificationsDoes anyone have any info on the white and grey connectors that sit at the end of the engine loom for a 1997 Rav 4? Any info is much appreciated!- 1
- 286
-
974DR3SGTE · updated
Join now to ask and comment!