Toyota RAV4 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,912 Posts
The factory wiring diagram shows that the Lock Sensor is part of the AC compressor.

If you already have the factory manual, you know that the Lock Sensor has 3 terminal connector attached. Pin #1 should have a light green wire, and pin #2 will have a White/Black wire. It doesn't appear that pin #3 is used.

Hopefully these color codes will help you identify the Lock Sensor cable on the compressor.
 
  • Like
Reactions: rav4mex
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top