All you want to know about Headers, mufflers, Resonators Etc

1 - 1 of 1 Posts

mensajero

Registered

Joined Jan 1, 1997

10,240 Posts

Discussion Starter • #1 • Jun 3, 2005

This is a great article regarding Mufflers, Headers, Resonators etc. Check out Suck, Squish, Bang, Blow :wink:

http://www.sportcompactcarweb.com/tech/9912scc_ssbbpart2/

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Mods for 2.0 2000 model RAV4 awd

4.1 D.I.Y. and Modifications

So I’ve read a lot of post on what people have really recommended for power increasing for the RAV4. I’m wondering when modding what should I do to the flat 2.0 for the 1gen. Also if that’s not an option would using the Tacoma 2.1 or 2.7 or 3.4 motors be a better bet
- 2
- 24
- Allen52009 · updated 2 h ago
Broken Air Vents

4.1 D.I.Y. and Modifications

Hello R4W I have a question, has anybody try to remake the air vents funcional again?, because the ones on my car all have the plastic piece that makes them move all at once is broke; thanks beforehand.
- 1
- 393
- Hellsgates695 · updated 5 d ago
DIY: Install $12 Keyless Entry on your 4.1 instead of replacing a lock cylinder

4.1 D.I.Y. and Modifications

This DIY is for people who'd like to install a keyless entry in a Rav that has not already been equipped with either a factory or aftermarket keyless entry or alarm. You can do this either for convenience, or as in this case, it is also a cheap, easy work-around for a picky driver's door lock...
- 19
- 10K
- D
  demoder · updated 11 d ago
19 x 7 wheels on 96 2dr 2wd

4.1 D.I.Y. and Modifications

Hey guys, I just installed a set of 19 x 7 wheels on my 96 2dr . They are mazda wheels with what appears to be a +50 offset. 225/55/19 tires all around. I didn't use any hubcentric rings, not sure if I need them or not? They look great and seem to fit well. The tires are fairly bald on the...
- 1
- 245
- B
  beetz · updated 17 d ago
Alternator bracket issue

4.1 D.I.Y. and Modifications

So, I'm working on replacing the alternator on my girlfriends Rav 4 (and a few other things, but ill leave this topic at the alternator.) Upon me loosening the tensioner to remove the alternator the other end of the bracket wasnt even held down to anything on the side of the engine. It was...
- 1
- 997
- M
  machak07 · updated 19 d ago