That happens occasionally with my iPhone after a call, the BT won't release. Turning off the BT from my phone brings it back, then turning it back on allows re-paring and normal function to resume. Turning off the radio won't do anything because the BT system remains on, even when the radio is off. An annoying bug for sure.
Blu logic hands free lock up issue
Hello everyone,
My blu logic hands free system is doing something odd. After playing a sound from my phone (eg. Text notification), the bluetooth system essentially hijacks my stereo and locks up. It goes completely silent, playing no sound from my phone or the stereo(all sources). Rebooting the phone, shutting it off, shutting off the stereo... nothing brings it back. Dead silence. Only pulling over and shutting off the car and turning it back on restores it.
Thoughts? Firmware upgrade??
Thanks for your help!
My blu logic hands free system is doing something odd. After playing a sound from my phone (eg. Text notification), the bluetooth system essentially hijacks my stereo and locks up. It goes completely silent, playing no sound from my phone or the stereo(all sources). Rebooting the phone, shutting it off, shutting off the stereo... nothing brings it back. Dead silence. Only pulling over and shutting off the car and turning it back on restores it.
Thoughts? Firmware upgrade??
Thanks for your help!
1 - 7 of 7 Posts
I've never had that with mine. When I get a text notification with my iPhone 5, the audio mutes for 3-4 seconds (too long IMHO) and the TEL MUTE flashes on the display, but the audio always resumes. Have you tried pushing the BT button when that happens?
Yep, I have turned the BT on and off on my phone, pressed the button, held the button, and yelled at it.. Threatened it.... Nothing
Did you try to hard reset the unit?
Press and hold the call button until you hear 4 consecutive beeps.
Press and hold the call button until you hear 4 consecutive beeps.
By holding down the button until 4 beeps (about 15 seconds)? Yep. No go at all. No beeps, no nothing. Completely silent and inoperable.
I meant do a hard reset.By holding down the button until 4 beeps (about 15 seconds)? Yep. No go at all. No beeps, no nothing. Completely silent and inoperable.
Remove the BT pairing profile on your phone. Start the car and press and hold it for 15+ sec (4 beeps) and that will hard reset the blu logic.
Then re-pair the phone.
1 - 7 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Toyota RAV4 Forums
Rav 4 World is the internet's largest Toyota Rav4 SUV and EV online forum community. Discuss towing, modifications, and more.
Full Forum Listing
Explore Our Forums
Recommended Communities
