Toyota RAV4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter · #1 ·
Hi, I lowered my 2 door Rav4 with H&R springs and bilsteins. I ended up with 4 degrees of negative camber. The outside tread blocks were not touching the road surface.
I used to 20 series Camry rear adjustable arms and welded them to the rav4 upper arms. After am alignment I now have zero camber and 2mm toe in. Will have to take some pics.
 

·
Registered
Joined
·
253 Posts
Interesting.

Pics please.
 

·
Registered
Joined
·
173 Posts
Oooh, yes some pictures please of the bars.
I've got same springs plus wheel spacers and inside edge very worn.
 

·
Registered
Joined
·
149 Posts
Discussion Starter · #6 ·
Here are some pics. Difficult to get a good picture because it's the upper arm that I made adjustable. Wheels are off a jeep patriot in 17x6.5" and the same offset as rav4. No wheel spacers.
 

Attachments

1 - 6 of 6 Posts
Top