Toyota RAV4 Forums banner
381 - 400 of 1,470 Posts
2019 XSE
16x7 Black Rhino Boxers ET 15
255/70/16 Falken Wild Peak AT3w's
Still workin' out a few minor rub issues, but once they are figured out I will post as I've been documenting the process for prosperity. Cause shared knowledge is the best knowledge!

Parking lot Princess

Image


Image


In da wylde

Image


Image
2019 XSE
16x7 Black Rhino Boxers ET 15
255/70/16 Falken Wild Peak AT3w's
Still workin' out a few minor rub issues, but once they are figured out I will post as I've been documenting the process for prosperity. Cause shared knowledge is the best knowledge!

Parking lot Princess

Image


Image


In da wylde

Image


Image
2019 XSE
16x7 Black Rhino Boxers ET 15
255/70/16 Falken Wild Peak AT3w's
Still workin' out a few minor rub issues, but once they are figured out I will post as I've been documenting the process for prosperity. Cause shared knowledge is the best knowledge!

Parking lot Princess

Image


Image


In da wylde

Image


Image
Looks great. Is it rubbing only when you turn the wheel? Would you recommend a smaller diameter tire or smaller width to remedy the issue? Also is the MPG affected much? Thanks for sharing the setup. It is pretty much exactly what I was wanting to do with ours. 2019 XSE Hybrid White with Black top.
 
Wow, all of these aftermarket rims are cool. I'm on the other side of the coin: I'm looking for a set of inexpensive, durable, rims (ideally steel) to mount Blizzak winter tires (225/60R18). I'd keep the factory tires on the factory rims for summer use...but most of the year here in Fairbanks is winter. At $100/tire swap x 2 tire swaps per year, cost adds up. Problem is that I can't find any steel wheels in 18" x 7" for my 2020 hybrid XSE. Any suggestions for durable but inexpensive rims for winter tires for an XSE? Thanks!
 
Wow, all of these aftermarket rims are cool. I'm on the other side of the coin: I'm looking for a set of inexpensive, durable, rims (ideally steel) to mount Blizzak winter tires (225/60R18). I'd keep the factory tires on the factory rims for summer use...but most of the year here in Fairbanks is winter. At $100/tire swap x 2 tire swaps per year, cost adds up. Problem is that I can't find any steel wheels in 18" x 7" for my 2020 hybrid XSE. Any suggestions for durable but inexpensive rims for winter tires for an XSE? Thanks!
For my rims I bought them secondhand and painted them myself. They are from a 2012 santa fe. In canada I used kijiji to find them, its like craigslist. The only key things to note are the bolt pattern which is 5x114.3, the center bore is 60.1 and the offset from +35 to +45 (35 will stick further out). You may have to get adapters if the center bore is larger, for mine I had to get rings that went from 60.1 to 67.1.
 
Very nice! Hey What kind of tint do you have on the rear tail lamps?

Sent from my IN2015 using Tapatalk
I used the vivvid light smoke tint from amazon:

Buy this stuff, not the cheap stuff on ebay. After working with this, its helluva lot easier to work with than the cheap stuff.

I only tinted the white parts. I didn't touch the red.
 
I used the vivvid light smoke tint from amazon:

Buy this stuff, not the cheap stuff on ebay. After working with this, its helluva lot easier to work with than the cheap stuff.

I only tinted the white parts. I didn't touch the red.
Awesome. Ty!

Sent from my IN2015 using Tapatalk
 
Great looking Rav @palacfap !

Im planning to get my rear lights tinted as well. The amazon one you posted is a hell lot cheaper then what I bought mine for. I wish I seen this before I pulled the gun. I went with a universal Lamin-X 12x24" and it was about $30
 
381 - 400 of 1,470 Posts